JH Electric Co., Ltd
JH Electric Co., Ltd Quality is the first, we always try our best to do better !
Add to Cart
Single Output switching power supply 75W 15V 5A Transformer AC to DC Converter
Features:
1. Reliable quality and good price
2. High efficiency and low working temperature
3. Built-in EMI filter
4. 100% full-load burn-in test
5. Protection: Over load protection, short circuit protection
Specification:
Model number | S-75-5 | S-75-12 | S-75-15 | S-75-24 |
DC Output Voltage | 5V | 12V | 15V | 24V |
Output Voltage Error | ± 2% | ± 2% | ± 1% | ± 1% |
Rated Output Current | 15A | 6.3A | 5A | 3.2A |
Output Current Range | 0-15A | 0-6.3A | 0-5A | 0-3.2A |
Ripple and Noise | 100mVp-p | 75mVp-p | 75mVp-p | 75mVp-p |
Inlet Stability | ± 0.5% | ± 0.5% | ± 0.5% | ± 0.5% |
Load Stability | ± 1% | ± 0.5% | ± 0.5% | ± 0.5% |
DC Output Power | 75W | 75W | 75W | 76.8W |
Efficiency | 74% | 81% | 82% | 84% |
Adjustable Range for DC Voltage | +10%, -5% | ± 10% | ± 10% | ± 10% |
AC Input Voltage Range | 85~132VAC/170~264VAC selected by switch 47~63Hz; 240~370VDC | |||
Input Current | 1.6A/115V 0.8A/230V | |||
AC Inrush Current | Cold-Start Current: 18A/115V, 36A/230V | |||
Leakage Current | <0.5mA/240VAC | |||
Overload Protection | 105%~150% Type: Cut Output, Reset: Auto Recovery | |||
Over Voltage Protection | .......... | |||
Temperature Coefficient | ± 0.03% /°C (0~50°C) | |||
Start, Rise, Hold time | 200ms, 100ms, 30ms | |||
Vibration | 10~500Hz, 2G 10min, /1 cycle, a total of 60 minutes, Each axes | |||
Withstand Voltage | Input and Output Interval: 1.5KVAC, Input and Enclosure: 1.5KVAC, Output and Enclosure: 0.5KVAC | |||
Isolation Resistance | Input and Output Interval: Input and Enclosure, Output and Enclosure: 500VDC/100M Ohms | |||
Working Temperature and Humidity | -10°C~+60°C (Refer to Output Derating Curve), 20%~90%RH | |||
Dimension | 157*97*38 mm | |||
Weight | 0.6kg | |||
Safety Standards | Meet UL 1012 requirement (Not apply for the mark) | |||
EMC Standards | ......... | |||
1. The testing condition for the parameter above is: 230VAC input, rated load, 25°C 70%RH, Humidity .
2. Error, include the setting error, line stability and load stability.
3. Wave test: adopting "A12" twisted pair wire for 20MHz, and 0.1uF-47uF capacitor short-circuit for interrupting .
4. Inlet Voltage Stability test: when it is over load, the lowest voltage of inlet is representative to the highest voltage .
5. Load stability test: the load is from 0% to 100% .
Dimension unit:mm