JH Electric Co., Ltd
JH Electric Co., Ltd Quality is the first, we always try our best to do better !
Add to Cart
Single Output LED switching power supply 15W 12V 1.3A Transformer AC to DC Converter
Features:
1. Reliable quality and good price
2. High efficiency and low working temperature
3. Built-in EMI filter
4. 100% full-load burn-in test
5. Protection: Over load protection, short circuit protection
Specification:
|
Model number |
S-15-5 |
S-15-12 |
S-15-24 |
|
DC Output Voltage |
5V |
12V |
24V |
|
Output Voltage Error |
± 2% |
± 1% |
± 1% |
|
Rated Output Current |
3A |
1.3A |
0.7A |
|
Output Current Range |
0-3A |
0-1.3A |
0-0.7A |
|
Ripple and Noise |
100mVp-p |
50mVp-p |
50mVp-p |
|
Inlet Stability |
± 0.5% |
± 0.5% |
± 0.5% |
|
Load Stability |
± 1% |
± 0.2% |
± 0.5% |
|
DC Output Power |
15W |
15.6W |
16.8W |
|
Efficiency |
70% |
74% |
76% |
|
Adjustable Range for DC Voltage |
+10%, -5% |
± 10% |
± 10% |
|
AC Input Voltage Range |
85~132VAC/170~264VAC selected by switch 47~63Hz; 240~370VDC |
||
|
Input Current |
0.5A/115V 0.25A/230V |
||
|
AC Inrush Current |
Cold-Start Current: 15A/115V, 30A/230V |
||
|
Leakage Current |
<0.55mA/240VAC |
||
|
Overload Protection |
105%~150% Type: Cut Output, Reset: Auto Recovery |
||
|
Temperature Coefficient |
± 0.020% /°C (0~50°C) |
||
|
Start, Rise, Hold time |
200ms, 100ms, 30ms |
||
|
Vibration |
10~500Hz, 2G 10min, /1 cycle, a total of 60 minutes, Each axes |
||
|
Withstand Voltage |
Input and Output Interval: 1.5KVAC, Input and Enclosure: 1.5KVAC, Output and Enclosure: 0.5KVAC |
||
|
Isolation Resistance |
Input and Output Interval: Input and Enclosure, Output and Enclosure: 500VDC/100M Ohms |
||
|
Working Temperature and Humidity |
-10°C~+60°C (Refer to Output Derating Curve), 20%~90%RH |
||
|
Store Temperature and Humidity |
-20°C~+85°C, 10%~95%RH |
||
|
Dimension |
99*97*35mm |
||
|
Weight |
0.3kg |
||
|
Safety Standards |
Meet UL 1012 requirement (Not apply for the mark) |
||
|
EMC Standards |
Meet FCC Part 15J Condition class B |
||
1.The testing condition for the parameter above is: 230VAC input, rated load, 25°C 70%RH, Humidity . 2. Error, include the setting error, line stability and load stability. 3. Wave test: adopting "A12" twisted pair wire for 20MHz, and 0.1uF-47uF capacitor short-circuit for interrupting . 4. Inlet Voltage Stability test: when it is over load, the lowest voltage of inlet is representative to the highest voltage . 5. Load stability test: the load is from 0% to 100% .
Dimension unit:mm